Sandretto 2000 tonne Injection Moulding Machine

Reference Number: W437/Y00

The clamp is 105t and injection 38t – the hydraulic power pack would be about 5-6 tons.

INJECTION UNIT
	EUROMAP CLASSIFICATION	cm3	30550
Screw diameter (A/B/C)	mm	155
Screw Length	L/D	24
Calculated shot volume	cm3	15850
Maximum Pressure on material	bar	1928
Injection Capacity `0 - 1.185 bar`	cm3/s	2100
Injection Capacity 1.928 bar	cm3/s	1800
Plasticizing rate (HDPE) `100rpm`	g's	240
Maximum screw motor torque	Nm	24300 71rpm
Maximum screw speed	rpm	100 @ 17190 Nm
Screw motor power	kW	132
Heating zones (+nozzle)	n˚	6+1
Total heating power	kW	145
Oil tank capacity	l	2000
Refrigeration requirement	fg/h	20400
H2O requirement at 15˚C	m3/h	1,6
H2O requirement at 30˚C (Option)	m3/h	3,1
	CLAMPING UNIT
	EUROMAP CLASSIFICATION	kN	20000
Mould clamping force	kN	20000
Mould opening force	kN	680
Min/Max mould thickness	mm	800 – 2000
Clamping stroke	mm	2200
Maximum daylight	mm	4200
Platen sizes (H x V)	mm	2560 × 2360
Clearance between tie-bars (H x V)	mm	1800 × 1600
Tie-bars diameter	mm	290
Ejection force	kN	300
Ejection stroke	mm	400
	GENERAL
	EUROMAP CLASSIFICATION	cm3	30550
Hydraulic circuit pressure	bar	195
Pumps motor power	kW	180
Total installed power	kW	457
Total net weight (clamping injection)	t	168 C : 130 – l : 38
Overall dimensions (L x H x W)	m	16 × 3,6 × 4,6