Netstal HP1500 (150 tonne) used injection moulding

Injection Moulding Machine (101-600ton)

Year: 1993
http://machineryinternational.co.uk/s/488
Price: £9,850

Send Us an Enquiry

Reference Number: W488/Y272

1993 year Netstal HP1500 (150 tonne) used injection moulding machine.

50mm screw and is 460mm between tie bars

The Netstall HP 1500 is 12.6 tonnes and the dimensions are 7.190 metres x 2.070 metres x 2.230 metres tall.

The dry cycle time is 1.2 seconds,the shot size is 352.8 grams based on pp

Hours Run: 70,244

Does it have a shut off nozzle? Yes

How many air valves does it have? 3

what type of products has it been making and what materials? Closures in Polyprop and HDPE

This is a one owner, well maintained machine.

Full Technical Details

Page 1

1.6 Technical Data

1.6.1 General

Type: HP 1500/870
Euromap Designation: 1500 H – 870
Net weight of machine, without hydraulic oil and without mould, without control cabinet and auxillary equipment: c. 12600 kg

Installed power type: 1500/8700
Heating,plasticising unit 20 D, 25 D: 24.3, 32.4 kW
Drive: 45, 55kW

Noise level
Measuring procedure and location as per DIN 45635 part 37, accumulator charging in idling operation (without closing movement and mould).
Point of measurement: typical operator position:
Operator’s side (controlbox):
Distance: 1m
Height from floor: 1.6m
Noise level: ca. 75 db (A)

(Levels above 80 dB (A) can occur depending on programming, mould and periphery)

1.6.2 Operating Mediums

Hydraulic Oil

Specification
Quality: H-LP 68 (DIN 51 524)
Viscosity ISO 3448: VG 68
Viscosity Index: VI = > 95
Quantity: 325 litres

Fill the oil with aid of filter pump. such pumps are usually put at the disposal of the customers by the oil suppliers. Reccomended grade of filteration = 10/micro.

Oil Level
The oil level must be on the upper edge of the sight glass

Oil Change
Normally Every 6000 working hours.

System Pressure: 210 BAR

Oil for the central lubracing system
Quality: H-LP 68 / H-LP 100
Viscosity class ISO: VG 68 or VG 100
Viscosity at 50 degrees C: 3.5 – 7 degrees E
Contents of reservoir: 2.7 litres*

USE ONLY NEW OIL!

Grease Lubrification

Roller Bearings within the injection piston

Grease: Microlube GBUY 131

Aftergreasing is necessary only after disassembly, where by the hollow space in the bearing has to be filled only up to one third at the maximum.

All Remaining Grease Lubricated Bearings:
Non-acid antifriction bearing grease, normally obtainable in commerce.

Nitrogen

To charge and retarget the nitrogen system, ONLY PURE NITROGEN has to be used, as normally available in industry. Use of other gased causes DANGER EXPLOSION! Identification colour of nitrogen supply bottlesgreen

Quantity – c 2 × 6720 litres.

The oil- and nitrogen quantities mentioned refer to a complete filling.

1.6.3 Clamping Unit

Clamping force, max – 1500 kN
Mould space, adjustable – 200 – 500, 260 – 560, 400 – 700 mm
Maximum distance between mould platens, max – 950× 1100 mm
Opening stroke, adjustable – max 450 mm

1.6.4 Injection Unit

Designation – N 870
Injection pressure, max – 434.18 kN
Stroke of injection piston, max. – 200 mm
Nozzle contact pressure – 78.34 kN
Stroke of injection unit – 495, 590 AMP and QPC

Screw Drive

Type – direct with oil motor
Type of oil motor – MRV450
Max torque – 322 – 1290 Nm
Max. rotation speed (drive 45 kW) – 816 – 204 min-1
Max rotation speed (drive 55 kW) – 997 – 249 min-1

1.6.5 Plasticising Unit

Screw diameter – 50 – 55 – 60mm
Max. Injection pressure – 2209 – 1826 – 1534 bar
Heating power 20 D – 24.3 – 24.3 – 24.3 kW
Heating power 25 D – 32.4 – 32.4 kW

You might also be interested in a Used Negri Bossi NB160 610 Injection Moulding Machine (2001)