Blow Moulding Machinery
Tetra Pak LX-6 (Sidel) PET Blow Machine
- Year: 2002
- http://machineryinternational.co.uk/s/525
- Price: €150,000
Reference Number: W525/Y385
Tetra Pak LX-6 machine’s year of manufacture is 2002. The machine is currently fitted for a PCO 38 mm preform. It has everything on it except the moulds.
The machine was taken out of production in working condition in April of 2008 and has been in a warehouse since November of 2008.
Tetra Plast™ LX-6
Technical specifications
Number of cavities 6
Output, up to 7200 bph
Product dimensions
Maximum preform length 165 mm
Preform diameter 18-35 mm
Neck ring diameter 27-42 mm
Maximum neck finish diameter 38 mm
Neck height 9-27 mm
Maximum bottle height 345 mm
Maximum bottle diameter 105 mm
Maximum bottle volume 2 litres (2.25 optional)
Equipment dimensions, L x W x H
Blowing module 3293 × 2325 × 3196 mm
Control cabinet 1998 × 602 × 2410 mm
Weight
Blowing module 6300 kg
Control cabinet 1200 kg
Preforms in feed 1200 kg
Total 8700 kg
Noise level
At control panel 83 dBA
Utility requirements
Installed power
Installed power, maximum 160 kW
Indicative consumptions
1500 ml bottle 88 kW
1000 ml bottle 62 kW
500 ml bottle 45 kW
Infrared heating 8 zones 132 kW
Operation & feeding system 28 kW
Power supply 230/400 V ±10%
Frequency 50 Hz ±1% – (60 Hz ±1%)
Cooling water
Cooling requirements 20000 kcal/h
Water temperature 8-12° C
Flow rate up to 5 m3/h
Pressure 3-5 bar
Compressed air
Validity of these consumptions: at a temperature of 0°C
and at sea-level.
40 bar air consumption For 0.25 – 2 liters bottle 240 up to 740 Nm3/h
7 bar (service air) consumption 35 Nm3/h
You might also be interested in a 2x 1000 litre Blow Moulding Machine
Are you interested in this item?
A Copy of this enquiry will be sent to your inbox
