Sold Blow Moulding Machinery
This Item Has Been Sold. but this item may be of interest:
Detailed Description and Specification for 1997 Bekum B7000 Used Blow Moulding Machine
- Name: 1997 Bekum B7000 Used Blow Moulding Machine
- Price: £15,000
- Year: 1995
B&W (Bekum) B7000 Used Blow Moulding Machine. (1997)
The machine is a B and W 7000
150mm centre head twin Cavity
Parison Control by Moog programmer (moog 25 point controller.)
Visi stripe head but not complete
the extruder motor drive has been changed from a shragger type motor to a dc drive with control gear in a separate cabinet.
Length – 4.00 m
Width – 2.20 m
Height – 2.90 m
Weight – 6.00 tonnes (estimate)
Blowing Capacity 2 × 2500 ml
Production Rate:
6 per min with a poor old tool with not much cooling.
pump condition Reasonable and working
electro mechanical relays and timers. Not connected but parts available for 150mm head. It is a Visi stripe extruder.
This is what gives you the clear line so you can see the level of the fluid inside..
Toggle
The moulding clamps hydraulically operate the toggles.
Can be installed with 5 litre on request, at additional cost.
cutting knife description Cut and squeeze, cold cut with parrision weld.
no deflash.
This Machine has sold, But are you interested in a similar item?
A Copy of this enquiry will be sent to your inbox
